Warmaster – A fortified Manor
A while ago, I fixed a mistake I did even a longer time ago - I treated myself to the Fortified Manor. This came out around the late 2000's, in June 2007 to be exactly (shown in White Dwarf #330). I wasn't even a student when it was released and the price was 40 GBP / 59,95 EUR, and stumbled across it a few years later in our local wargaming store when I think it was around 70-80-ish euros and for that money you got a whole Battle Force back then. Besides, I didn't had the room for a gaming table so stocking up on terrain wasn't my priority.
Yet, the item got discontiniued and what made this set special, was that it was not just a combination of the chapel and tower, but had an exclusive sprue with parts to connect the two buildings, and that would create quite the price surge in the years. So seeing the manor on ebay for 200 to 300 Euros wasn't uncommon, and they sold for that price, which made it worse. I was not going to pay that amount of money and would simple sit it out - and I was proven right, as I had the chance to pick up two copies from their re-release in January at 75 EURs each.
But why did you get greedy and bought two? Well, the tower and the chapel are more than 90 EURs if you just buy them, making it cheaper to go for the manor and you even get the fences and exclusive sprue free on top as well.
So, yeah, we got it, Dennis, you made a bargain, but there is Warmaster in the headline. So what does this mean? I get to that directly. As written above, the 2nd hand market pricing, showed there was a demand for that kit, and while there were some alternatives, somebody went very close - as close possible and made a crowdfunding campaign for a digital copy.
Age of Sigmar – Realmscape Terrain
Part of the terrain items from the Stormbringer subscription (issue 55 to be exact) was a sprue of the Realmscape terrain from Age of Sigmar, in this case half of the Domicile Shell. This is meant to be part of the settlements, that the forces of order are building on new realms or reclaimed areas.
The sprues and other complementing pieces were used in various starter sets and expansions. This particular sprue came often with a variant B that would create a medium sized building in progress, along with two statues. We will see the statues in the Stormbringer subscription as well (in issue 65 and 74), but from my understand not the second wall sprue but another copy of this one in issue #69.
With this massive sprue, we can build an L or rather U-shaped ruin. It comes with quite some additional pieces to enhance the amount of detail and not just making it a flat ruin, but provide some depth. Casting is good, reasonable amount of detail and a lot of parts you can easily dry brush. The mould lines are present, but that is usually the case with the terrain due to the thickness of the parts.
Warhammer 40,000 – Forge World Taros Underground Entrance
A blast from the past - a Forge World item from 2006 that I picked up a long time ago, but for a bit more than the original RRP of 16 GBP. Nowadays you would have to pay somewhere between 55 to 130 EUR on eBay to get your hands on one of these.
As it is so rare, I thought I would take some measurements. Just in case some of you want to scratch build this thing. Due to its bulky and non-organic structure, this should be within realistic limits. The grid of my cutting mat is 1 cm each.
February 2025 review
Welcome to March and let's do a recap on February 2025.
I pre-ordered the Army Painter - John Blanche Masterclass sets at Radaddel and now that they were shipped, I have set 1 and 2 in my hands. Looking forward to use them on the Turnip project.
Beyond that, we had a lot of Warhammer on here during February. From the High Elves release for The Old World, we covered the Ellyrian Reavers. And strongly reminds me to get back painting my Blood Bowl High Elf team.
Deth Wizards – The call of the Undead
Decisions were made, bases were chosen and prepared. I used spackle to clean up any holes in the bases, like the slots and casting aids.
And I went with the tactical stone for Krell. I am thinking about glueing the tabs to the inside of the bases of the two heroes.
Horus Heresy – Mechanicum Krios Battle Tank / Venator
An entirely new kit from the Mechanicum Heavy Support Force is the Krios Battle Tank including the Venator variant.
This vehicle was moved from a former Forge World resin kit into a multi-part plastic kit, covering both variants and three different weapon load outs. You can build from this set the regular Krios Battle Tank (either with Lightning Cannon or Irradiation Blaster) or Krios Venator with a Pulsar Fusil. We do not have a official RRP yet, as the kit is currently only available as part of the Mechanicum Heavy Support Force, but pricing is very likely between 55 to 62,50 EUR.
Age of Sigmar Stormbringer Magazine 56 to 61
Last week the 11th shipment arrived and we only have three more until we've reached the end of the German Stormbringer Magazine by Hachette subscription. A bit weird, as it felt so far ahead and yet now so close. Anyhow, I am excited to take a deep dive into the content of the issues 56 to 61.
As usual, you can find an overview on the issues so far over here, along with the detailed unboxings of older shipments as well:
Deth Wizards – Barricades and Markers
We talked about the buildings for our little town for Deth Wizards, but no we need to add a bit here and there, to add details.
The buildings themself are from the Briarwood range by Dark Realm, and they do have their own set of scatter terrain, but I wanted more or let's say different things.
What really inspired me, were the barricades build for Mordheim (Town Cryer issue 03) and the skirmish games in the Generals Compandium / Warhammer Skirmish.
Horus Heresy – Mechanicum Heavy Support Force
Early in february we saw the teaser for the next Horus Heresy boxed set - the Mechanicum Heavy Support Force! A bit as a surprise, because we mostly saw regular battle groups so far with Legiones Astartes or Solar Auxilia, now the Mechanicum even gets some tactical reinforcement.
Interesting combination regarding the content, as we get variants of existing kits with the Karacnos and Thanatar, and an entire new plastic kit with the Krios Battle Tank / Venator, for a price of 110 GBP/ 145 EUR.
Deth Wizards – There is something odd about this town…
The Deth Wizards table is a group project. While some participate with their own warband, like Dino is painting up his undead, and I am gathering in an Middlehammer theme around Heinrich Kemmler, Florian contributes with terrain.
As we wanted to be flexible with the terrain and not locked in just with Deth Wizards, we looked up various ranges on MyMinifactory and Cults and ended up at Dark Realms and their Briarwood range. That wouldn't just work with Deth Wizards, but Mordheim, Middlehammer Empire, Frostgrave and to some extend even Turnip and beyond.
Last year, while I was looking for terrain files for Warmaster, I came across Dark Realms and I bought the Castle Argent files, but subscribed to the tribe as well, giving me access to some of the Briarwood houses and ruins, and we went with House #1 for a test print, to see if it would work. Florian used his new Bambu Lab A1 and used Bambu PLA filament (some say it's repacked Sunlu or Esun PLA+).
The buildings are split into different floors and you can take of the roof as well. There are smaller detail parts as separate pieces, to not create a problem with overhands. The fit is impressive and the overall quality by the Bambu print is incredible. This very close to a plaster or resin cast, but much more durable and weighs significantly less.
Like us on Facebook
Follow me on Instagram
Categories
- events (199)
- fantasy (582)
- General (159)
- historical (622)
- Little Big Adventures (4)
- offtopic (5)
- reviews (518)
- science fiction (644)
- showroom (101)
- terrain (114)
- work-in-progress (409)
