Adeptus Titanicus – Civitas Imperialis
The first terrain kit released in 2018 for Adeptus Titanicus were the Civitas Imperialis. It was part of the initial Grand Masters edition of the Adeptus Titanicus Horus Heresy boxed set.
What's the point in reviewing a 2 year old kit? Well, first of all it completes the Manufactorum Imperialis review I just did, and the second reason, the Civitas kit didn't receive the coverage it deserves. It bears more potential than the regular, small buildings on the box or shop description show. For that reason this review will provide an introduction to the kit, that I'll continue with further build(ing)s using the bits and pieces provided from this kit.
Because the interesting aspect is, that the design of the Civitas Imperialis kit picks up the initial terrain design of the 1988 and 1989 boxed sets.
Gaslands – Building a car
The car growled along hard. A quick look in the rear-view mirror confirmed Dino's worst fears - he wouldn't be able to shake off the scavengers in this terrain. A strange feeling of calmness overcame him. With routine he checked the armament of the car and put his semi-automatic within reach.
Suddenly the car slowed down and with the handbrake pulled, it turned on the spot, but was carried onward by the centrifugal forces and for a few more meters, until it came to a full stop. The scavengers, visibly irritated by this manoeuvre, had in turn halted and lined up opposite to the freelancer.
"Nobody has to get killed, man! Just give us what you got and we'll drop you off at Rutherford's nearest garage." their leader shouted.
Three vehicles, Dino thought. A cross-bike, a buggy and the leader's car. That wasn't fair.
"Give up freelancer," the leader repeated his warning, "you can see there's three of us."
Three against one. That really wasn't fair. They should have brought reinforcements, he thought, stepped on the gas and raced towards them.
And with that, a warm welcome to Gaslands! Most of you have heard of this small but fine set of rules from Osprey Games, which is played without miniatures, but with toy cars instead. Well, I'm not a car fanatic, but I like good stories, I like to be creative and I have a passion for fast, dynamic games. So this is just what I get with Gaslands.
In the rulebook, I noticed especially the campaign section in the back. You start with 30 cans and continue to upgrade your car or team during the course of the campaign. But before it can start, it needs a car first. In my supermarket there's a small area with Hotwheels at the checkout and I grabbed one. This Copo Camarro was the basis for freelancer Dino's car.
Cancelled events and getting by in the current situation
Quite the weeks behind us and surely some interesting times ahead. I had to take a time out until last monday, as I was bed-bound for over a week. Work in the meantime was quite different, as many took the option for home office and almost all of the events were cancelled due to health concerns. So a lot less interaction with other people.
And those concerns spread out into our hobby as well. A lot of smaller and midsized events were cancelled, and even large one as the Adepticon. Games Workshop re-scheduled the huge preview they had planned and will provide it in an online variant. So far, Salute stays stubborn but I guess that the government or venue will take care of that (and they are waiting for that to happen due to liability issues). The way they went through with Hammerhead this weekend seemed unwise to me as well.
Any how, I'm sad that these action have to be taken, but I am rather safe than sorry. So I'll take a raincheck and will visit events after this whole thing has sorted out. In the meantime, I am pretty sure most of you have a pile-of-shame and some kind of hobby-related backlog, that is the perfect activity for the upcoming weeks of quarantine, isolation or other precautionary measurements. Either shop at your local gaming store or preferred online shop of your choice, stock up on primer and paints and get it going.
Testing 3D printing services
For the Adeptus Titanicus project I already got into 3d printing and had some terrain printed for gaming and base purposes. So far I only had access to a FDM printer, that my buddy has in his mancave / lab.
I have my eye on additive manufacturing and often come across that topic on work related tours, as in the last few years at Formnext. At these there were quite a few resin printers and samples showing miniatures and action figures, much closer to the needs of a wargamer. Resin printers are a bit more difficult to run and in the consumer field, the printing area is rather small so only works for smaller prints / pieces and is quite time consuming.
Rubicon 2cm Flak Vierling 38
To create the Sd.Kfz. 7/1 variant, the Selbstfahrlafette 2-cm-Flakvierling 38 auf Fahrgestell Zugkraftwagen 8 t (self-propelled anti-aircraft half-track), I'd need flakvierling kit by Rubicon.
These kits are already planned in a way to be combined, so it can be build either as a weapon team of itself or optional mounted on the flatbed of the Sd.Kfz. 7.
The kit comes with a crew, of which I am not really fond, so these will be replaced with the proper crew from the Perry Miniatures as range, as this vehicle and AA-gun will be deployed with my Afrikakorps.
Like us on Facebook
Follow me on Instagram
Categories
- events (195)
- fantasy (556)
- General (156)
- historical (607)
- Little Big Adventures (4)
- offtopic (5)
- reviews (483)
- science fiction (606)
- showroom (98)
- terrain (109)
- work-in-progress (399)
