Gaslands – Building a car
The car growled along hard. A quick look in the rear-view mirror confirmed Dino's worst fears - he wouldn't be able to shake off the scavengers in this terrain. A strange feeling of calmness overcame him. With routine he checked the armament of the car and put his semi-automatic within reach.
Suddenly the car slowed down and with the handbrake pulled, it turned on the spot, but was carried onward by the centrifugal forces and for a few more meters, until it came to a full stop. The scavengers, visibly irritated by this manoeuvre, had in turn halted and lined up opposite to the freelancer.
"Nobody has to get killed, man! Just give us what you got and we'll drop you off at Rutherford's nearest garage." their leader shouted.
Three vehicles, Dino thought. A cross-bike, a buggy and the leader's car. That wasn't fair.
"Give up freelancer," the leader repeated his warning, "you can see there's three of us."
Three against one. That really wasn't fair. They should have brought reinforcements, he thought, stepped on the gas and raced towards them.
And with that, a warm welcome to Gaslands! Most of you have heard of this small but fine set of rules from Osprey Games, which is played without miniatures, but with toy cars instead. Well, I'm not a car fanatic, but I like good stories, I like to be creative and I have a passion for fast, dynamic games. So this is just what I get with Gaslands.
In the rulebook, I noticed especially the campaign section in the back. You start with 30 cans and continue to upgrade your car or team during the course of the campaign. But before it can start, it needs a car first. In my supermarket there's a small area with Hotwheels at the checkout and I grabbed one. This Copo Camarro was the basis for freelancer Dino's car.
Cancelled events and getting by in the current situation
Quite the weeks behind us and surely some interesting times ahead. I had to take a time out until last monday, as I was bed-bound for over a week. Work in the meantime was quite different, as many took the option for home office and almost all of the events were cancelled due to health concerns. So a lot less interaction with other people.
And those concerns spread out into our hobby as well. A lot of smaller and midsized events were cancelled, and even large one as the Adepticon. Games Workshop re-scheduled the huge preview they had planned and will provide it in an online variant. So far, Salute stays stubborn but I guess that the government or venue will take care of that (and they are waiting for that to happen due to liability issues). The way they went through with Hammerhead this weekend seemed unwise to me as well.
Any how, I'm sad that these action have to be taken, but I am rather safe than sorry. So I'll take a raincheck and will visit events after this whole thing has sorted out. In the meantime, I am pretty sure most of you have a pile-of-shame and some kind of hobby-related backlog, that is the perfect activity for the upcoming weeks of quarantine, isolation or other precautionary measurements. Either shop at your local gaming store or preferred online shop of your choice, stock up on primer and paints and get it going.
Testing 3D printing services
For the Adeptus Titanicus project I already got into 3d printing and had some terrain printed for gaming and base purposes. So far I only had access to a FDM printer, that my buddy has in his mancave / lab.
I have my eye on additive manufacturing and often come across that topic on work related tours, as in the last few years at Formnext. At these there were quite a few resin printers and samples showing miniatures and action figures, much closer to the needs of a wargamer. Resin printers are a bit more difficult to run and in the consumer field, the printing area is rather small so only works for smaller prints / pieces and is quite time consuming.
Rubicon 2cm Flak Vierling 38
To create the Sd.Kfz. 7/1 variant, the Selbstfahrlafette 2-cm-Flakvierling 38 auf Fahrgestell Zugkraftwagen 8 t (self-propelled anti-aircraft half-track), I'd need flakvierling kit by Rubicon.
These kits are already planned in a way to be combined, so it can be build either as a weapon team of itself or optional mounted on the flatbed of the Sd.Kfz. 7.
The kit comes with a crew, of which I am not really fond, so these will be replaced with the proper crew from the Perry Miniatures as range, as this vehicle and AA-gun will be deployed with my Afrikakorps.
Oldhammer Khorne Berzerker
We have the undivided squads set with Chaos Terminators and regular Chaos Space Marines. Let's take a look at some Chaos Space Marines with a dedicated mark of a chaos god. And of course that has to be the mark of the most powerful of them all - KHORNE!
There are multiple ways to do so, you could give the mark to regular CSM, choose a chapter devoted to the Blood God or go full in, with the renegades of the World Eaters. Back then, they were not yet Khorne Berzerkers, but "regular" very frenzy CSM of the XII legion.
These Worldeaters (sic) got a mono-pose plastic kit, and depending on which year we're looking at different metal miniatures.
Lollis, Titans and the White Dwarf
Let us start with a serious topic. Health is such a valuable good and many of us take it for granted. DKMS has developed a lolly, that makes it pretty easy to get yourself registered as a donor for blood / bone marrow cancer. You can order the lolly for free, follow the instructions, send in the swap to get registered. Easy as that.
Return of Warhammer – The Old World
Games Workshop announced in the midth of november that the Old World of Warhammer would return. And this has created an incredible amount of buzz. So far it has been updated with an insight to the new map of the old world.
And so far, we only know, that it is still a lot of time until it returns. At least two or rather three years from now. The setting has been set into relation with Age of Sigmar, as Horus Heresy is with Warhammer 40.000. Interestingly enough the map adds to that theory, as the different coat of arms seen, could point towards a civil war like crisis, like the Time of Three Emperors. A very fitting comparison to the civil war of 40k.
Adeptus Titanicus – Manufactorum Imperialis Terrain set
With the Manufactorum Imperialis Games Workshop released this month the third terrain plastic kit for Adeptus Titanicus.
Fences for my Rohan town
We've added barrels and crates to the fantasy town, what's next? A bit of fencing! Along with the barrels, I ordered the palisade fencing at Renedra.
Each bag comes with two sprues, with 4 piece of fence and 5 posts. They are 5 GBP per double-pack of sprues.
Titans, pirates and the weekend
Busy week - published my review on the Nemesis Warbringer kit yesterday and completed the pictures for the upcoming review on the Manufactorum Imperialis terrain kit for Adeptus Titanicus.
Like us on Facebook
Follow me on Instagram
Categories
- events (193)
- fantasy (553)
- General (156)
- historical (603)
- Little Big Adventures (4)
- offtopic (5)
- reviews (477)
- science fiction (599)
- showroom (98)
- terrain (109)
- work-in-progress (398)
