Heavy Field Car – Steyr 1500A for the DAK
With the first supply drop this year back in february of the Rubicon novelties, I did not only get my hands on some reinforcement for the British with the Morris C8 and a QF-25, but a nice heavy field car (at least that's the matching entry on EasyArmy) for my Afrikakorps as well with a Steyr 1500A/01.
Adeptus Titanicus – Dire Wolf Heavy Scout Titan
In January Games Workshop announced a new titan for Adeptus Titanicus - the Dire Wolf Heavy Scout Titan. After about 4 months the kit is available via Forge World and today, we have the chance to see it in our review.
The Dire Wolf is a variation of the Warhound Titan and available in two variants, one with a Neutron-Laser and one with a Volcano Cannon.
Morris towing a field gun for the 8th Army
Covering the motor pool for my 8th army last november, and for certain guns you need a proper tow in Bolt Action. For that reason I got myself a Morris and the fitting QF gun by Rubicon Models via Tabletopper from the netherlands.
The Morris C8 "Quad" can be build as either the MK II or Mk III field artillery tractor. It's a compact kit, two sprues, two hulls and a few options for the different marks.
Bolt Action – British & Inter-Allied Commandos
With the two D-Day sector books that cover a lot of special operations, the need for British and Inter-Allied Commandos is certainly there. And Warlord Games delivered for this demand.
The first Commandos kit that was released around 2011, was based on the regular British infantry, with a recut of a part of the sprue. We did a review back then and you can not only see how far Warlord Games has progressed over the last decade, but our reviews as well (that was pre-bilingual coverage, so you'll only find the German one online).
Bolt Action Campaign D-Day US Sectors
In early 2021 Warlord Games picked up D-Day again and supplementing D-Day British and Canadian sectors campaign book with the US Sectors.
With 160 pages and a RRP of 20 GBP (roughly 25 EUR) Campaign D-Day: US Sectors marks the third and final instalment of Warlord Games D-Day trilogy. While the British and Commonwealth forces landed in Gold, Sword and Juno pushed towards Caen, the US Americans did so on the beaches Omaha and Utah and moved towards west and south from there, beginning with Carentan and further liberating the coast line and attacking armed forces along the Atlantikwall. The US-Sector book covers the actions of the US forces in the summer after D-Day, until August / September 1944.
Bolt Action Campaign D-Day British & Canadian Sectors
Warlord started the deep dive on D-Day with the campaign supplement of the same name - D-Day Overlord. But that is not all, the sectors receive more love, starting with the British & Canadian Sectors in this supplement and the US sectors in the next one, already released by the time this review went online.
Both, the British & Canadian and US D-Day sector books close the gap between the landing and the further actions around the Battle of the Bulge and Operation Market Garden. Because even after the successful landing in Normandy, the further operations were intense tasks, to bring in more troops, defeat counter attacks and fortify the bridgehead in Northern France.
Adeptus Titanicus – Warmaster Iconoclast
The variant of the Warmaster Titan, the Iconoclast with different weaponry was released in Winter '21, and actually the first of the Adeptus Titanicus plastic kits, that I didn't cover as a review - until now!
The Warmaster keeps it very similar to the Warlord Titan, where only a single sprue is swapped to cover the alternative variant of the titan. And for that reason, this is more of an add-on along with some further add-ons, to the initial review of the Warmaster variant with the plasma destructors. As well as making use of my newly access to 3d printing.
The kit wasn't supplied by the manufacturer this time, but more of a casual chance at a trade, and I added a few bits that I found online (more in detail below). The RRP of the Warmaster is now 130 EUR since April '22 (compared to 125 EUR when it was released last year) and it covers four large sprues, an oval base, decals, a rather unflattering black and white assembly instruction, along with the cards and terminals made from card board, covering the rules and information for gameplay.
April 2022 review
A mixed month with a lot of 3D Printing of course, I tested out some files for projects where I am going to print the miniatures myself. But it is important for me to not drown in the new possibilities and get some structure in there. I didn't reduce my stock to fill it with printed stuff again, just because I can. So, this needs a plan.
These projects cover a protagonist and antagonist each, basically two forces for each system, so I'm more flexible to host games and such. What are these - well, according to my Tabletop Parking Lot theory, I still have open lots outside of the 28mm department. With my fascination for Adeptus Titanicus, and already having quite the stock here, Epic makes for a reasonable expansion, and covers 6-8mm along with a company level wargame (in distinction to the platoon level that 28mm Warhammer 40k - at least in 2nd edition is).
HANS VII – Return of the traveling tabletop box
It is that time of the year again! Hans! Returns once more to my door step. And it is the 7th time, that is on its journey.
I've written about HANS! in the last years, so you can see what came around in 2019 with one of the first HANS that I participated, in 2020 with HANS V! and last years 2021 and sixth tour prior to leaving TTW.
First Experience with the 3d printer
I have the Anycubic Mono 4K for about 1,5 months now and went through the first litres of resin. Therefore, I'd like to share my first experience with owning a 3d printer.
First of all, the choice of the printer and technology. I don't have the need to print whole armies in 28mm or larger things, it was always about bits and small-scale items. And with that need, FDM was out of the picture, because it wouldn't provide the level of detail that I wanted for those. Resin print was the option I was left with, but the challenges of where to run it and the initial costs.
I estimated roughly for the costs, that as long as my invested in 3d printing services wouldn't be higher than 500 EURs, investing in a printer of my own wouldn't pay off. And 500 EUR is a high threshold just for bits, but with 3 or 4 mid-sized army projects I would rapidly get there. From that point of view, going for two Epic armies and a few bits, I might just be below that. But we all know, once you have access to such a device, you're going to use it. So, that decision was made, that it would be cheaper and more flexible for me to own a printer for what I have in mind (but more on that later) - at least that was my assumption at that point.
Like us on Facebook
Follow me on Instagram
Kategorien
- Allgemein (204)
- Events (198)
- Fantasy (581)
- Galerie (124)
- Gelände (109)
- Historisch (664)
- In Arbeit (546)
- Little Big Adventures (4)
- Offtopic (9)
- Reviews (525)
- Science Fiction (690)
